2000 Ford Ranger Egr Valve Location. The best way to replace it is to place the vehicle on a hoist and lower the transmission mount and crossmember to pivot the engine towards the firewall. If you are having trouble removing the carbon, you may need to put some carburetor cleaner into a small catch pan and allow the valves to soak in it overnight.
I have a 2000 ford ranger with a EGR problem. Code 401 from www.justanswer.com
The exact location varies depending on the engine (2.5l, 3.0l or 4.0l). Click show more to see instructions below:in this video, 1a auto shows y. It is usually attached to the upper intake manifold with.
The Egr Pressure Sensor Is Located Within Inches Of The Egr Valve.
Only soak the valve openings. You may need to look between and under some components on your vehicle. Do not submerge the entire unit.
But Before You Jump Straight To Replacing The Valve, See If You Can’t Clean It First.
The dpfe sensor is located near the egr valve, on the left side of the engine (see location illustration below). The exact location varies depending on the engine (2.5l, 3.0l or 4.0l). The egr pressure sensor is located within inches of the egr valve.
The Egr Pressure Sensor Is Located Within Inches Of The Egr Valve.
It is usually attached to the upper intake manifold with. Look for a round, thick, metal disc about three inches in diameter. It is on your upper intake on the drivers side, look for the pipe that runs down to your exhaust.
Posted On Feb 27, 2009.
Yours is located on the back side of the cylinder head near the firewall. The exact location varies depending on the engine (2.5l, 3.0l or 4.0l). Not all trucks have egr quote:
Location Of The Egr Sensor On 2000 Ford Ranger.
The egr hose is smaller than the radiator hose and easy to spot. Scrub the valve openings with a pipe cleaning tool. Bought a chilton manual, thinking it would provide good pictures and discription of where to find the egr.
