Whirlpool Duet Front Panel Removal. Remove the flat, wavy silver metal clips that connect the top of the washer cabinet to the rear panel. To remove the interface board you need to pull the washer forward and remove the screws coming in from the back of the top panel.
I am trying to remove the control panel on a duet from www.justanswer.com
Open the pedestal drawer to its full position and remove the hex nut, which can be found on the top of each drawer arm. Remove the flat, wavy silver metal clips that connect the top of the washer cabinet to the rear panel. Lift the top panel from the rear, then pull the panel off of the machine and set.
The Front Panel Can Now Be Removed From The Washer.
Whirlpool duet / kenmore he3t washer: To remove the interface board you need to pull the washer forward and remove the screws coming in from the back of the top panel. Use a flat head screwdriver to.
Lift The Front Of The Washer And Place A Block Of Wood On Each Side 6 Inches From The Front Of The Washer.
Remove the flat, wavy silver metal clips that connect the top of the washer cabinet to the rear panel. You'll have to access the back of the dryer to remove a panel from these newer whirlpool dryer models. Whirlpool electric duet dryer model gew 9200ll1 control panel keeps shutting down (lights all but the light in dryer compartment shut off) when this happens it may not come back on for 1 hour or all n.
Next, Remove The Three Screws Securing The Toe Panel To The Front Of The Washer (Fig.
How to remove the control panel from the whirlpool duet sport 1. Up and inner front screws off, you pull the top of the front panel out towards you and lift the front panel off the clips that hold the bottom of the panel onto the cabinet. Check the display on the dryer for error codes.
And Want To Replace The Door.
Press and hold the start button for five seconds. Step 2 go behind the washer and remove the three screws that secure the top panel to the back of the washer using a. Vocational, technical or trade school.
Open The Front Door Of The Washing Machine And Place A Person On The Left And Another On The.
We think the door catch is defective as the power won't come on to the dryer. Remove these with a screwdriver, then simply lift the cover up and slide it off. Whirlpool duet pedestal drawer removal the whirlpool dryer stand and washer drawer can both be removed using the same process.
