Ge Profile Microwave Touchpad Not Working. The control board generates a low voltage that is supplied to the membrane switch. Everything was working fine up until a few days ago when we had a power outage.
We have ge profile dual oven and we are getting f76 error from www.justanswer.com
I fixed my own oven keypad, saved me $150 or more over replacing it. If the display goes out partially, the display board is more commonly at fault. Ge profile spacemaker 2.0 microwave:
Pulled The Touchpad And Controll Board Out Checked All Connections, Did A Resistance Check On The Touchpad And Everything Reads What It Should According To The Scat In The Stove But Between Pins 5 And 9 On The Ribbon Cable I Read A Short.
Unplug microwave remove vent guardremove control panel. Only tools needed is a 1/4 inch ratchet! Carefully push up on the touch pad assembly to lift the notches out of the metal slots.
Really Expensive To Have A Ge Tech Fix This.
Make sure the clock is set. Try this to see if you can fix yourself. Press the windows key and type device manager, then press enter.
If The Display Goes Out Partially, The Display Board Is More Commonly At Fault.
All you need to do in this case is simply press and hold clear/off for three seconds and that should unlock it. If the display goes out partially, the display board is more commonly at fault. If the display isn’t working at all, either the main control board or the display board could be at fault.
Five And Nine Do Not Equate To Any Number But Could They Be Messing Things Up?
Ge profile spacemaker 2.0 microwave: En español live chat online. If the microwave key panel is not responding or working properly, check the following:\tmake sure.
Built In Touch Screen Doesn't Work Properly.
If the display isn’t working at all, either the main control board or the display board could be at fault. The control board generates a low voltage that is supplied to the membrane switch. Step 5 carefully lift and pull a little.
