Whirlpool Dryer Remove Front Panel. That's where the lint build up will be and where you can clear out the dryer itself. Disconnect the wire leads connected to the door switch.
Removing Front Cover Whirlpool Cabrio Dryer WED8000DW4 from www.youtube.com
To remove the dryer’s top, lift out the lint trap and, underneath it, unscrew the screws that secure the dryer’s top. Push down on the clips with the putty knife to disengage. Pull the top forward while lifting up on the front of the top.
Balance The Front Panel And Drum As Best You Can As You Remove The Two Bottom Screws That You Have Just Loosened.
How to open a dryer front for lint cleaning. When you remove the lower access panel, you should. Lift up the gray panel and rotate 180° so that glass window is in the correct position to reverse the door.
The Blower Assembly Is Easy To Access On This Dryer.
Pull the top forward while lifting up on the front of the top. Unplug dryer or disconnect power. You'll have to access the back of the dryer to remove a panel from these newer whirlpool dryer models.
Some Models May Have Extra Screws Holding The Front Panel In Place.
A minor hitch when setting your whirlpool dryer can disable the start button. The front is placed onto a clip on the front of the dryer cabinet, the front panel has a hole in it that will sit on a tab. Open the dryer door and remove the screws that are holding the hinges to the door.
How To Remove The Whirlpool Duet Lower Access Panel Step 1.
Push down on the clips with the putty knife to disengage. Disconnect power from the dryer. Go to the front of the washer and locate the touchpad assembly ribbon connector.
Press In On The Connector Tabs And Pull The Wiring Connector Apart.
Push a stiff, thin putty knife between the top and one side, about 2 1/2 inches from the front corner. Disconnect the control panel wire harness connected to the circuit board by lifting the tab then pulling the harness off. Slide a putty knife under the front left and right sides of the control panel to release the spring clips.
