Kohler Tub Drain Stopper Not Working. Hold a large enough jam or other jar lid over the drain upside down. Insert a drain snake into the drain line and turn and push to loosen any debris that’s blocking the drain.
KOHLER Chrome Bathroom Decorative Sink Drain in the Sink from www.lowes.com
If the drain stopper is not moving or closing, check the adjustable link. The lever seems to be stuck in the down position. Insert a drain snake into the drain line and turn and push to loosen any debris that’s blocking the drain.
Adjust Your Clicking Bath Drain In 10 Minutes.
(on some styles, the rocker arm on the drain stopper fits between the coils on the spring; Start with the stopper on the clicker mechanism and make sure it is tightened down all the way. With these, you will need to extract the drain stopper and rocker arm from the drain opening in order to free the spring.)
If Your Bath Clicker Drain Is Not Clicking Or Sealing Properly, Refer To The Following Troubleshooting Information.
Kohler bathtub drain stopper not working. And if you have small areas, then painting them with basic and light colors helps them look larger. This action will help to remove the stopper from the drain fitting.
Once Enough Water Fills The Tub, The Suction From Beneath The Drain And The Weight Of The Water Should Keep The Lid Against The Drain Enough To Keep Water In The Tub When The Stopper Doesn't Work.
I unscrewed the brass post out of the drain (counterclockwise) and then took the assembly to the hardware store where i found a new set screw. Turn the water on to fill the tub. If the drain stopper is not moving or closing, check the adjustable link.
Hold A Large Enough Jam Or Other Jar Lid Over The Drain Upside Down.
My kohler tub stopper has a set screw that fixes the chrome stopper to a brass post that threads into the drain. So stick to the colours like beige or product or gray for the living room where in actuality the flow is necessary. Set the stopper aside so it’s out of the way but not somewhere you’ll lose it.
Pull Out The Stopper Assembly.
The lever seems to be stuck in the down position. If they aren’t, that alone might be the problem. Open the stopper and remove by twisting the knob in a counterclockwise fashion.
